等离子鞘套热力学波动对电磁波传播的影响

针对等离子鞘套热力学波动造成电磁波传播特性变化的问题，结合湍流理论、等离子理论和电磁波传播理论，得到了热力学参数波动与介电常数间的关系。计算了不同状态下热力学参数波动引起S和Ka波段电磁波透射和反射系数的变化。结果表明，当电子密度增大，S波段反射系数变化减小、透射系数变化增大；当Ka波段在碰撞频率10MHz时，反射系数变化增大、透射系数变化减小，在碰撞频率1GHz和50GHz时透射系数变化反射系数变化先增后减。不同高度下波动的影响也不同，S波段透射和反射系数变化随高度升高先减后增；Ka波段透射系数变化先减后增、反射系数变化先减后增而后再次减小。因此，应根据实际环境状态获得波动的包络范围，进而针对性开展测控通信系统设计。     

基于可靠性数据的航材备件需求预测方法

航材备件的需求预测已成为装备综合保障领域研究的难点.主要对各部件寿命分布类型进行归纳与总结,建立多数零件服从寿命分布类型的需求预测模型,并对军机执行任务这一特殊情况建立了战损备件预测模型.以可靠性数据为研究基础,对正态分布、指数分布、威布尔分布等备件进行分类分析,根据实际情况逐步精确备件保障概率的取值.计算结果表明,方法能给出合理的备件保障概率和备件需求预测结果.     

U型复合材料结构件热压罐固化变形及补偿技术应用研究

以复合材料U型构件为研究对象,采用数值模拟的方法对U型件进行热压罐温度场的模拟,模拟出在不同时间段工装和工件的温度分布情况,模拟工件在工装传热和变形影响下的内部传热、固化度、最终变形情况和残余应力水平等。根据模拟结果,优化热压罐固化工艺参数,从而改善固化热变形问题,根据分析结果制定补偿方案并实施验证,同时优化工装结构形式,采用工装型面补偿技术对零件固化变形进行预补偿。结果表明,补偿后零件变形后的外形与理论几何外形相差1.37mm,验证了补偿技术的可行性。工装型面补偿技术可以有效提高复合材料结构件的制造精度。     

超高速撞击下PTFE/Al含能材料薄板的载荷特性分析

不同于传统惰性材料的空间碎片防护结构,含能材料防护结构在超高速撞击下的冲击起爆特性是其防护能力得以提高的根本原因。PTFE/Al含能材料防护结构的冲击起爆特性改变了弹丸强冲击载荷下的破碎机制,弹丸内部的冲击压力对于分析含能材料在超高速撞击下的防护机理具有重要意义。对超高速撞击试验中回收的PTFE/Al防护结构后板进行损伤特性分析,获得了对应速度条件下弹丸的破碎特性。基于一维冲击波理论,分析PTFE/Al靶板在超高速撞击条件下的冲击响应过程,结合考虑化学反应效率的热化学反应模型,获得了弹丸在碰撞与爆炸联合作用下的载荷特性,通过与试验结果对比验证,获得该材料完全反应的临界撞击速度约为1800 m/s,弹丸的临界破碎速度为2875 m/s,小于铝防护结构中对应的临界破碎速度。给出了弹丸在PTFE/Al、铝两种防护结构中产生相同冲击压力时对应的临界速度,分别为弹道段的800 m/s和破碎段的3580 m/s。     

硅橡胶/双酚A-苯胺型苯并噁嗪树脂耐烧蚀复合材料的制备与烧蚀结构的研究

苯并噁嗪树脂具有优异的成炭和抗高温氧化性能,是新一代的耐烧蚀树脂。以双酚A-苯胺型苯并噁嗪树脂为耐烧蚀树脂,采用1H-NMR、DSC和转矩流变仪研究其成环率和加工性能;以硅橡胶为耐烧蚀基体,采用熔融共混方法制备了硅橡胶苯并噁嗪树脂耐烧蚀复合材料。进行力学和氧乙炔焰烧蚀检测,利用FT-IR、Raman和SEM研究复合材料综合性能和烧蚀结构。结果表明:苯并噁嗪树脂能够明显提高硅橡胶复合材料的耐烧蚀性能,当树脂添加量为20份时,复合材料具有较好的耐烧蚀和力学性能;该复合材料经过氧乙炔焰烧蚀后,烧蚀层形成表面陶瓷层、裂解炭化层和基体层。表面陶瓷层主要由SiO_2,SiC和C组成,裂解炭化层的主要组由C,SiO_2,SiC以及炭化彻底的碳和炭化不完全的有机结构组成。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

Modeling of ionospheric scintillation at low-latitude

The presence and movement of plasma density fluctuations in the F-region of the ionosphere are studied by monitoring phase and amplitude of radio waves propagating through the region. In this paper, we have used weak scattering theory and assumed the plasma density fluctuations to behave like phase changing diffraction screen. Appropriate relations for scintillation index S₄, and phase variance δ? are derived and computed for different parameters of the plasma density irregularities of the ionosphere. SROSS-C2 satellite in situ measurements of plasma density fluctuations, which provide direct information about the structure and morphology of irregularities that are responsible for scintillation of radio waves, were used first time to develop a scintillation model for low latitude. It is observed that the scintillation index S₄ and phase variance δ? depends on the strength of the plasma turbulence. Finally, the results obtained from modeling are compared and discussed with the available recent results.     

基于小波包变换及相关系数法的复合材料层合板冲击位置识别研究

复合材料较为广泛应用于航空、航天等工程领域,但对冲击载荷十分敏感。因此,对复合材料结构承受的冲击载荷进行在线监测以及冲击位置的实时识别具有重要意义。文章以复合材料层合板为研究对象,基于两个冲击位置的距离越靠近则接收到信号幅频特性相似度越高的特点,采用FBG光纤光栅传感器,通过小波包变换的方法来提取能量特征向量,同时结合相关系数法来实现复合材料层合板的冲击位置识别。在480 mm×480 mm的复合材料层合板上开展冲击实验,8次实验皆完成了冲击位置识别,其中7个点距离误差为0 mm,实现精准识别,另一个点误差在6%以内。     

大型复合材料构件连接装配二次损伤及抑制策略

在分析复合材料构件成型和制孔过程中产生缺陷的基础上,从构件成型质量、连接孔加工质量和连接孔配合质量3个方面研究了影响装配应力分布的主要因素及其影响规律。研究发现,装配间隙为1.0mm时,连接区最大应力可达537MPa;垂直度误差为1°时,连接区最大应力超过300MPa;连接孔同轴度误差为0.03mm时,连接区最大应力可达443MPa。装配应力过大引起材料内部成型缺陷和制孔损伤的进一步扩展,形成二次损伤,严重影响装配质量。通过合理设计结构和铺层、优化成型工艺和制孔参数,可以减少初始损伤;采用自动化装配技术、优化工装结构、合理安排装配工序和应用填隙补偿工艺降低装配应力,进而有效抑制二次损伤的诱发与扩展,为实现大型复合材料承力构件的高质量精准连接装配提供理论方法和技术支持。     

Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).